- Sanctuary Startup
- Turn on both AC units to ‘Cool’ and ‘On’ if it’s warm, or ‘Heat’ and ‘On’ if it’s cold
- Turn on the overhead lights (leftmost switch at the end of the sound booth)
- Turn on each of the computers in the booth (OBS, Propresenter, Live Professor)
- If they are already on, restart them
- Plug the black usb-c cable into the touch screen of the Wing Touchscreen
- On the wireless keyboard, press FN+Q to connect the keyboard to the laptop, then tap the spacebar to wake up the laptop
- Turn on the three power strips throughout the booth
- Underneath the OBS computer
- On the first camera pole
- On the second camera pole
- In the rack room, turn on the power conditioner in the audio rack
- Turn on the Pixel Sticks brain next to the audio rack
- Turn up the knobs on the amps
- The blue amp (in house), both knobs at max
- The orange amp (lobby/outside) goes to 3 o’clock on the left and 12 o’clock on the right
- In the breaker panel (next to the first time kid’s check in station), turn on breaker 2
- There are three remotes in the sound booth, turn on the following devices
- Confidence Monitor TV
- Main Projector
- 2 Cross Projectors
- Once these are on, use the input button to switch to HDM-1
- Sanctuary Shutdown
- There are three remotes in the sound booth, turn off the following devices
- Confidence Monitor TV
- Main Projector
- 2 Cross Projectors
- In the breaker panel (next to the first time kid’s check in station), turn off breaker 2
- Turn down the knobs on the amps
- The blue amp (in house)
- The orange amp (lobby/outside)
- Turn off the Pixel Sticks brain next to the audio rack
- There are three remotes in the sound booth, turn off the following devices